RADWAG AP-12.5Y Automatic Device for Multichannel Pipette Calibration

OVERVIEW

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device features a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes.

Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. On this instrument, calibrating a 12-channel pipette takes 1.5 hours instead of 6 hours.

When purchasing the AP-12.5Y, you get:

two calibrated sensors: THB S and THB W,
two weighing pans: standard, and for balance test and calibration,
two pumps: a single-channel pump and a four-channel pump

The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration.

After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports.

The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment).

The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

Kategori: Timbangan Pribadi

RADWAG adalah brand timbangan presisi dan peralatan weighing profesional yang banyak digunakan untuk kebutuhan laboratorium, quality control, riset, farmasi, makanan dan minuman, kimia, manufaktur, hingga aplikasi industri yang membutuhkan hasil penimbangan akurat dan stabil. Melalui pilihan produk seperti analytical balance, precision balance, moisture analyzer, microbalance, dan solusi timbangan industri, RADWAG membantu perusahaan meningkatkan konsistensi data timbang, mendukung proses pengujian, menjaga kualitas produk, serta memperkuat dokumentasi kerja di area laboratorium maupun produksi. Mitra Hitech menyediakan produk RADWAG untuk membantu pengguna memilih timbangan yang sesuai dengan kebutuhan kapasitas, ketelitian, lingkungan penggunaan, dan standar operasional perusahaan.

Brand: Radwag

Deskripsi
Ulasan (0)

DATASHEET

Metrological parametersPhysical parametersCommunication interfaceEnvironmental conditions

Maximum capacity [Max]	52 g
Readability [d]	0.01 mg
Tare range	-52 g
Standard repeatability [5% Max]	5 µg
Standard repeatability [Max]	10 µg
Standard minimum weight (USP)	10 mg
Standard minimum weight (U=1%, k=2)	1 mg
Linearity	±0.03 mg
Stabilization time	4 s
Adjustment	internal (automatic)
Display	10″ touchscreen
Weighing pan dimensions	ø26 + automat
Packaging dimensions	550x560x500 mm
Net weight	17 kg
Gross weight	23 kg
Communication interface	USB-A ×2, USB-C, HDMI, Ethernet, Wi-Fi^®, Hotspot
Operating temperature	+10 — +40°C
Operating temperature change rate	±0.3°C/1h (±1°C/8h)
Relative humidity	20% — 80%
Relative humidity change rate	±1%/h (±4%/8h)