System Square X-ray Inspection System SX2554HW / SX4074HW

Highly stable relative mass inspection achieved with a new X-ray sensor

Stable mass inspection achieved with a new X-ray sensor

The relative mass inspection can be made stably even for a lightweight and large number of products such as individually-packaged ones and high-speed transportation which cannot be supported by the auto checker. For example, when inspecting dressing in a small bag, the dispersion observed in the conventional systems is greatly suppressed.

Simultaneous inspection of multiple items available

“Foreign objects” included in the product, “relative mass” and “shape” excluding the package can be inspected simultaneously. In the inspection of the shape, the system contributes to quality improvement by inspecting cracks, chippings, length/width, area, and other items.

Deskripsi
Ulasan (0)

Easy operation

Easy-to-use operability

Touch panel inspection screen ensures easy operation.NG level can also be adjusted intuitively. (SX2044W, SX2554W, and SX4074W, etc.)

Versatile inspection functions

Foreign body inspection + shape inspection

In addition to the foreign body inspection, the shape inspection can be performed at the same time. (For details about possible inspection products, contact System Square.)

Mask and missing product inspection

The mask function to specify an inspection range and the missing product inspection to check for missing product can also be made at the same time when the foreign body inspection is performed.

Various products can be inspected.

Foreign bodies in aluminum packing materials and cans, through which the light is not transmitted and the contents of which cannot be seen, are also detected.

A wide variety of foreign bodies can be detected.

The system inspects foreign objects with higher density more easily.

Extensive management functions

USB data management (option)

Data management through network (option)

The data of multiple machines can be managed with PC through the LAN network.

Safety

Incorrect inspection or hazardous work is prevented.

Trapezoidal inspection port, that products are not flowed to the non-inspection area, prevents incorrect inspection.Illumination of the whole inspection port calls attention to operators during X-ray irradiation. (Patent pending) (SX2044W, SX2554W, and SX4074W, etc.)

X-ray exposure level

The X-ray inspection system mainly uses the X-ray with a small energy.

Easy cleaning – HACCP compatibility

The HACCP-compatible all stainless steel body is sanitary and easy to clean up. (W[water proof] Type) The IP66 dust protection and waterproof standard is satisfied. (inspection chamber of W[water proof] Type model)

Model	SX2554HW	SX4074HW
Dimension of inspection product *1	W240mm×H120mm	W390mm×H150mm
Transport weight	5kg　*1
Transport belt speed	15 〜 45m/min *2
Belt width	270mm (without improper tracking-less function) (270mm with improper tracking-less function is optional.)	420mm (without improper tracking-less function) (420mm with improper tracking-less function is optional.)
Detection sensitivity	φ0.3mm iron or stainless ball, stone, glass, hard bone, and high density plastic pieces, etc.
Display unit	12.1-inch wide TFT color LCD (with touch panel)
Structure	Main unit/Base: All-stainless (SUS304) Waterproof structure with the main unit conforming to IP66
Pass line	750±50mm
Max. X-ray output	Tube voltage (Max.): 50kV, Tube current (Max.): 5.0mA However, the electric power is limited to 150W.	Tube voltage (Max.): 75kV, Tube current (Max.): 8.0mA However, the electric power is limited to 300W.
Operating environment	Temperature: 0 to 35C, Humidity: 30 to 85%, No dew condensation allowed. (It is necessary to clean the filter periodically.)
Weight	135kg	185kg
Power supply	AC100V±10% / AC200V±10% 1.0kVA 50/60Hz	AC100V±10% / AC200V±10% 1.5kVA 50/60Hz

*1 Varies depending on the contents of inspection. For details, contact System Square.
*2 If even higher speed is needed, contact System Square.
* Appropriate options may be separately needed in the following cases: Large temperature deviation in the installation location, high humidity, too cold or too hot object to be inspected.