Baykon BX18 Weighing Indicator

BAYKON BX18 is a DIN rail mounted indicator to install in a cabinet for intensive dusty enviroment. It offers RS-232C, RS-485, Analogue output, Parallel port including 4 x Inputs and 6x Outputs, Modbus RTU fieldbus interfaces as standard.
Powerful calibration options including electronic calibration without test weights, span calibration of non-empty tanks support easy and fast installation and service. BX18 is featuring 10 step adaptive filter for fast settling, up to 999.999 display resolution and 1600 conversion per second.
Programming and calibration can be executed via device keys and by PC/PLC through serial ports and fieldbus. BX18 is powered by from 12-28 volt DC supply.

Features

14mm LED display
Up to 1600 convertion/sec
Calibration via keys and by PC/PLC through interfaces
Electronic calibration (eCAL) without test weights
Span calibration (sCAL) of non-empty tanks.

System integration

RS-232C serial port
RS-485 serial port
Modbus RTU
Analog selectable as 0-20mA, 4-20mA, 0-5 VDC and 10 VDC
Parallel I/O port as 4 x Inputs and 6 x Outputs

Linearity	% 0.0015 FS
Temperature coefficient	2 ppm/°C
Display	6 digits, 7 segments, red, 14 mm high
Status annunciators	Gross, net, motion, centre of zero, units (kg, g, t, lb, klb, N, kN)
Keyboard	5-key (function, GN, tare/clear, zero, print)
Key lock	Keys can be locked against unauthorized access
Tiype (A/D Converter)	24 bit Delta – Sigma ADC
Conversion rate(A/D Converter)	Up to 1600 conversions per second
Minimum input sensitivity (A/D Converter)	0.1 μV per interval
Analogue input range (A/D Converter)	0 mV to + 18 mV (unipolar) ; -18mV to +18mV (bipolar)
Resolution (A/D Converter)	Internal up to 16.000.000; display up to 999.999 d
Type (D/A Converter)	16 bit D/A converter
Max. cable length (D/A Converter)	300 meter
Max. load resistance (D/A Converter)	500 Ω
Calibration	Standard: By etalon weights via keys or serial port via IndFace1x software
	eCal: Electronic calibration without etalon weights
	sCal: Span calibration of non-emptied tanks.
Digital filter	10 step adjustable adaptive digital filter
Weighing functions	Tare, zero ing, auto zero tracking, motion detection, auto-zero at power-up
Other functions	Label number, gross, tare indication
Digital outputs	6 set points with relay contact output.
Digital inputs	4 opto-isolated inp uts are programmable for zeroing, tare, clear, hold, peak, print etc.
RS-232C	1200 to 115200 baud, programmable
RS-232C	Continuous, Printer, BSI (Baykon Serial Interface) protocol
RS-485	1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus1200 to 115200 baud, 8 none 1, 7 even 1, 7 odd 1, 8 even 1 or 8 odd 1, Up to 31 units on the bus
Modbus RTU	1200 to 115200 baud, 8 none 1, 8 even 1 or 8 odd 1, up to 31 units on the RS-485 bus
Analogue	Programmable to 4 – 20 mA, 0 – 20 mA, 0 – 5 VDC or 0 – 10 VDC
Excitation	5 VDC, max. 100 mA
Number of load cells	Up to 6 load cells 350 Ω or 18 load cells 1100 Ω in parallel
Connection	4 or 6 wire technique. Cable length 274 m/mm² for 6 wire connection
Operation temperature	-15°C to +55°C; 85% RH max, non-condensing.
Enclosure	Polycarbonate, mounting in standard DIN rails, IP20
Enclosure	89,7 mm x 107,6 mm x 62,2 mmPolycarbonate, mounting in standard DIN rails, IP20, 89,7 mm x 107,6 mm x 62,2 mm
Power Requirement	12 – 28 VDC, Max. 0.2 A